New GR firmware 2.03 available for download

Discussion about Ricoh GR

New GR firmware 2.03 available for download

Postby odklizec » Thu Oct 03, 2013 9:56 am

As promised, Ricoh just today published the first feature enhancing firmware its GR camera. It brings some welcome additions, enhancements and bug fixes.
http://www.ricoh-imaging.co.jp/english/ ... /gr_s.html

*Numbers in the () indicate reference page on the operating manual.
【Shooting Mode】

Shutter speed at the maximum aperture can be set up to 1/2500 seconds.
Changed the order of the icons for No.21 to No.25 in the shooting display (p.18).

【Playback Mode】
<Switching from Playback Mode to Shooting Mode> (p.28)

Pressing the shutter release button fully after starting up the camera in playback mode can switch to shooting mode.

【Shooting Menu】(p.114-116)
<Crop>

Added 47mm crop (in 35mm format).
Former [Crop to 35mm] has changed into [Crop]. It has three options: [OFF], [35mm] and [47mm].
When [35mm] or [47mm] is selected, [35mm] or [47mm] appears instead of [CROP] on the shooting screen (p.18).

Note: 
When set to [47mm], the angle of view is equivalent to 47mm (in 35mm format).
When set to [47mm], [L] or [M] cannot be selected in [Format/Size] of the [Picture Format], and RAW files will be recorded as [S]
If [28/35mm] or [28/35/47mm] is registered with [Set Fn1 Button], [Set Fn2 Button] or [Effect Button Setting] of the [Key Custom Options] menu, the angle of view can be changed each time pressing the correspondent button(p.107)

<P Mode Selection>

Added the program diagram in [Max Aperture Prior.].
Newly added [P Mode Selection] (can be set only in P mode and M mode) has two options: [Normal] and [Max Aperture Prior.] (Maximum Aperture Priority).
When [Max Aperture Prior.] is set in P mode, [PA] appears on the shooting screen.

When [Program] is selected in [One Press M Mode] of the [Key Custom Options] menu (p.42), the aperture value and shutter speed are adjusted according to the [P Mode Selection] setting you set.


【Key Custom Options Menu】(p.118-119)
<Shutter Button Confirmation>

Added [Shutter Button Confirmation].

When set to [On], pressing the shutter release button halfway can save the settings in ADJ. mode or in exposure compensation.

【Setup Menu】(p.114-116)
<Eye-Fi RAW Transfer>

Added [Eye-Fi RAW Transfer] (available only when using Eye-Fi cards which support RAW files).

It has two options: [Allow] and [Deny]. When [Deny] is selected at [Eye-Fi transfer Selected Images], RAW files are not transferred.

【Playback Menu】
<Displays the Number of Remaining Images to be Transferred>(p.97)

When transfer images using [Eye-Fi transfer Selected Images], the number of remaining images to be transferred can be displayed on the playback screen.

<File Name of Transferred Images>(p.97)

Image files with a folder number of over 200 can also be transferred at [Eye-Fi transfer Selected Images].

The file names of transferred images are below:

Last two digits of the folder name + last six digits of the file name

Changes to V2.03
Exif tag [Manufacturer of image input equipment] change to RICOH IMAGING COMPANY, LTD.
When focus is set with [Multiple AF], AFL is spot AF
Improved image quality for dark section when developing Dynamic Range Compensation [Strong] setting by RAW Development function of GR camera for RAW file that captured image with the Dynamic Range Compensation [Strong].
When LCD Confirmation time is set [HOLD] and taking image with [Custom Self-Timer], automatically taking next image with setting Shooting interval.
Improved image quality when developing RAW file with combining brightness correction and limb darkening correction.
Standard icon is displayed when taking image with setting Image Setting to Standard and playback with detail information display mode.
Improved color reproduction of white balance [Multi-P AUTO] for some scenes.
Improved ColorMatrix for setting of DNG file.
Improved image quality for taking image with ISO 1600 to 3200 and Noise Reduction setting [Weak],[Medium],[Strong] and [Auto].
Improved stability when selecting transfer by Eye-Fi.

Direct FW link (both Win and Mac):
http://www.ricoh-imaging.co.jp/english/ ... 1_v002.zip
Pavel Kudrys
---
Flickr gallery:
http://www.flickr.com/photos/odklizec/
User avatar
odklizec
Site Admin
 
Posts: 6036
Joined: Sat Aug 11, 2007 5:10 pm
Location: Today in Slovakia

Re: New GR firmware 2.03 available for download

Postby MikePenn » Thu Oct 03, 2013 5:02 pm

Done ! Thanks !
MikePenn
 
Posts: 190
Joined: Thu Feb 10, 2011 2:25 am
Location: Philadelphia, Pennsylvania

Re: New GR firmware 2.03 available for download

Postby thelps » Fri Oct 04, 2013 12:32 am

odklizec wrote:<P Mode Selection>

Added the program diagram in [Max Aperture Prior.].
Newly added [P Mode Selection] (can be set only in P mode and M mode) has two options: [Normal] and [Max Aperture Prior.] (Maximum Aperture Priority).
When [Max Aperture Prior.] is set in P mode, [PA] appears on the shooting screen.

When [Program] is selected in [One Press M Mode] of the [Key Custom Options] menu (p.42), the aperture value and shutter speed are adjusted according to the [P Mode Selection] setting you set.



This I like, very good idea!
Tim
__________________________________________________________________________________________

| Ricoh GRD I Limited | Ricoh GRD II | Ricoh GRD III | Ricoh GRD IV | Ricoh GR | and some inspiration
User avatar
thelps
Site Supporter
 
Posts: 3757
Joined: Mon Nov 05, 2007 9:12 am
Location: Adelaide, Australia

Re: New GR firmware 2.03 available for download

Postby Ray Rainbird » Fri Oct 04, 2013 6:54 am

I cannot get my gr to update can anyone help I followed the instructions but no go
Ray Rainbird
 
Posts: 77
Joined: Tue Aug 13, 2013 7:44 am
Location: edinburgh scotland

Re: New GR firmware 2.03 available for download

Postby odklizec » Fri Oct 04, 2013 8:28 am

Hi Ray,

What exactly is your problem? Did you download and unpack the content of FW zip? If you do so, you should get the file rg1_v002.frm .Now simply upload that file to the SD card (either via the card reader or by connecting the camera to your computer).

If you connect the camera to computer, you should see it as a new drive. Then simply move the file rg1_v002.frm to "ricoh" drive (its root). Then disconnect the camera, start it and in the menu search for Confirm Firmware Version (last item in Setup menu). Then confirm overwriting of existing FW with new version and wait for confirmation.
Pavel Kudrys
---
Flickr gallery:
http://www.flickr.com/photos/odklizec/
User avatar
odklizec
Site Admin
 
Posts: 6036
Joined: Sat Aug 11, 2007 5:10 pm
Location: Today in Slovakia

Re: New GR firmware 2.03 available for download

Postby Ray Rainbird » Fri Oct 04, 2013 8:57 am

Yes I did that and followed the step by step instuctions and the camera did not update
Ray Rainbird
 
Posts: 77
Joined: Tue Aug 13, 2013 7:44 am
Location: edinburgh scotland

Re: New GR firmware 2.03 available for download

Postby odklizec » Fri Oct 04, 2013 9:03 am

Strange. What it says if you select the "Confirm Firmware Version" option?
Pavel Kudrys
---
Flickr gallery:
http://www.flickr.com/photos/odklizec/
User avatar
odklizec
Site Admin
 
Posts: 6036
Joined: Sat Aug 11, 2007 5:10 pm
Location: Today in Slovakia

Re: New GR firmware 2.03 available for download

Postby Ray Rainbird » Fri Oct 04, 2013 9:06 am

Does not let me
Ray Rainbird
 
Posts: 77
Joined: Tue Aug 13, 2013 7:44 am
Location: edinburgh scotland

Re: New GR firmware 2.03 available for download

Postby odklizec » Fri Oct 04, 2013 9:18 am

Does not let you what? Execute the FW update? What does it show in "Current Version" and "New Version" text fields?
Pavel Kudrys
---
Flickr gallery:
http://www.flickr.com/photos/odklizec/
User avatar
odklizec
Site Admin
 
Posts: 6036
Joined: Sat Aug 11, 2007 5:10 pm
Location: Today in Slovakia

Re: New GR firmware 2.03 available for download

Postby reeluff » Fri Oct 04, 2013 10:36 am

What exactly and how does this feature work? I do not seem to be able to figure it out.

thelps wrote:
odklizec wrote:<P Mode Selection>

Added the program diagram in [Max Aperture Prior.].
Newly added [P Mode Selection] (can be set only in P mode and M mode) has two options: [Normal] and [Max Aperture Prior.] (Maximum Aperture Priority).
When [Max Aperture Prior.] is set in P mode, [PA] appears on the shooting screen.

When [Program] is selected in [One Press M Mode] of the [Key Custom Options] menu (p.42), the aperture value and shutter speed are adjusted according to the [P Mode Selection] setting you set.



This I like, very good idea!
reeluff
 
Posts: 23
Joined: Wed Sep 04, 2013 5:25 pm

Next

Return to Ricoh GR

Who is online

Users browsing this forum: No registered users and 0 guests