Ricoh GF-1 & universal TTL cable & Sigma DP3 Merrill

Discussion about Ricoh GXR system

Ricoh GF-1 & universal TTL cable & Sigma DP3 Merrill

Postby DiZegna » Fri Dec 26, 2014 12:45 pm

Hi to all,

for those, who are interested. I've checked the Ricoh GF-1 flash directly connected my new Sigma DP3 Merrill camera. The flash is reacting well in every camera regimes (A, S, P, M). Even the Flash works well, when its set up on every regimes (not slave) - Auto & manual.

Then I've checked connect the Flash via Micnova cable (Universal TTL). It works again in every regimes and on all presets. BUT definitly it doesn't work in flash TTL regime.

Valid for my both cameras, GXR and Merrill:
The best for my purposes is the best to set both the Ricoh flash and the cameras to manual regime. Try several shoots "per blind" to set the right exposure. I'm useing the exposure warning. I'm not happy with the TTL regime, because in aperture priority on my GXR it still gives back too long times as shooting without flash.

Kamil

See pictures of described equipment:
https://drive.google.com/folderview?id=0B0CumvVRbB7iZTRmTTkxY1JhUU0&usp=sharing

Some GXR shots from Greece taken with 28mm and 50mm:
https://www.flickr.com/photos/69713865@ ... 538585969/
DiZegna
 
Posts: 12
Joined: Fri Dec 06, 2013 9:21 pm

Return to Ricoh GXR

Who is online

Users browsing this forum: No registered users and 2 guests