How to show "Error History" list

Answers on Frequently Asked GX100 Questions

How to show "Error History" list

Postby odklizec » Mon Aug 13, 2007 3:00 pm

Source of knowledge:
http://forums.dpreview.com/forums/read. ... e=24135621

Go to VIDEO mode. press the DISP button and then press the (green) Playback button. Press both buttons for a few seconds until the LCD shows the ERROR HISTORY page. Note if errors are recorded. If errors are reported, power on the camera, go back to camera auto mode, go to MENU and navigate to RESTORE DEFAULTS and restore defaults. If malfunction persists and errors reported in ERROR HISTORY, send camera back to Ricoh to diagnose and repair.


You may eventually try the "Master Reset" described here.. viewtopic.php?f=26&t=35

Does anyone know the meaning of the Error codes? If so, don't forget to let us know about it! ;)
Pavel Kudrys
---
Flickr gallery:
http://www.flickr.com/photos/odklizec/
User avatar
odklizec
Site Admin
 
Posts: 6036
Joined: Sat Aug 11, 2007 5:10 pm
Location: Today in Slovakia

Re: How to show "Error History" list

Postby Tom Caldwell » Tue Aug 14, 2007 1:16 pm

That is useful to know Pavel - I haven't the time now but I will certainly try this when I get the chance - all my little Ricohs are working well but maybe there is a sniffle there that I have not noticed :)
Tom Caldwell
Coffs Harbour
Tom Caldwell
Site Supporter
 
Posts: 907
Joined: Mon Aug 13, 2007 1:24 pm
Location: Coffs Harbour Australia


Return to FAQ

Who is online

Users browsing this forum: No registered users and 1 guest